How to Pet a Porcupine

I discovered something new in a staff meeting a few weeks ago, and that is that you can pet a porcupine without getting hurt. I have never actually pet a porcupine, but I was told it is possible without a follow-up trip the hospital, if you do it correctly.

Porcupine

Photo courtesy of © flickr.com/photos/arthur_chapman/3986448936/

If you want to pet a porcupine without getting stuck by a bunch of quills you don’t run up and startle it.  You don’t quickly scoop it up into your hands and give it a big hug.  If you want to pet a porcupine you have to develop trust with it.  First, you hold out your hand to see if it wants to come near and sniff you. Only after it sniffs you can you pet it, but you have to do it a certain way starting at the head and petting down.  To pet a porcupine any other way could potentially hurt…a lot.

Some people are a lot like porcupines. They have quills, and they will stick you if you handle them the wrong way.    You know the kind of people I am talking about, they tend to be a bit grouchy, pessimistic, standoffish and avoid personal contact, have a tendency to complain and point out the bad in a situation, etc…  These people tend to be a lot like porcupines.  If you run up and startle them you’re going to get hurt.  If you try to pressure them into doing something you’re going to get hurt.  If you cross their path in a way they don’t like, start looking for the nearest hospital.

To pet one of these porcupines requires developing trust just like a real porcupine. No, holding out your hand to see if they sniff you is probably not the best way to go about it, but spending time getting to know them is.  Learning about their perspective, their past, their priorities can give you insight in how best to go about working and getting along with them.  Taking the time to building trust with can go a very long way, and save you a lot of pain in the end.  Just as I am sure petting a real porcupine is an amazing experience, I know that getting someone who is a bit prickly on your side can be just as fulfilling.

Also, for those who are pastors of churches and have opportunity to work with porcupines, the reality is that they are also sheep in need of a good shepherd. They can’t simply be dismissed. You can’t just steer clear of them like you might a real porcupine in the wild. You have to learn to pet them.  You have to learn to lead them. So you might as well do it the right way, and save yourself some pain.

Posted on
Category: Leadership

Please note: I reserve the right to delete comments that are offensive or off-topic.

Leave a Reply to Diplomi_wkSn Cancel reply

Your email address will not be published. Required fields are marked *

276,160 thoughts on “How to Pet a Porcupine”

  6. This design is steller! You most certainly know how to keep a reader entertained. Between your wit and your videos, I was almost moved to start my own blog (well, almost…HaHa!) Fantastic job. I really enjoyed what you had to say, and more than that, how you presented it. Too cool!

    Reply

  11. Эта информационная статья охватывает широкий спектр актуальных тем и вопросов. Мы стремимся осветить ключевые факты и события с ясностью и простотой, чтобы каждый читатель мог извлечь из нее полезные знания и полезные инсайты.
    Уточнить детали – https://rakhoi.one/phi-chuyen-nhuong-duoc-quyet-dinh-boi-ai

    Reply

  18. Если требуется экстренная помощь при алкогольном кризисе — Narcology Clinic Москва предоставляет срочную помощь на дому: выезд нарколога, купирование симптомов, мониторинг состояния, без очередей и задержек.
    Подробнее можно узнать тут – частная наркологическая помощь москва

    Reply

  23. Читатель отправляется в интеллектуальное путешествие по самым ярким событиям истории и важнейшим научным открытиям. Мы раскроем тайны эпох, покажем, как идеи меняли миры, и объясним, почему эти знания остаются актуальными сегодня.
    Что ещё? Расскажи всё! – http://shga.kr/archives/165

    Reply

  24. Что мы предлагаем в рамках 3D печати
    Наша 3D печать — это точность, скорость и индивидуальный подход, который включает подготовку цифровой 3D модели, рекомендацию оптимального сырья, калибровку 3D принтера для точного результата. Возможна печать как единичных деталей, так и серийных партий. Мы выполняем заказы для инженеров, архитекторов, дизайнеров, производителей и частных клиентов. По завершении печати мы можем провести постобработку — шлифовку, окраску, сборку изделия. Мы фиксируем все параметры печати, чтобы клиент был уверен в результате: https://itformula.ca/index.php?title=3D-%D0%BF%D0%B5%D1%87%D0%B0%D1%82%D1%8C:_%D0%A3%D0%BD%D0%B8%D0%BA%D0%B0%D0%BB%D1%8C%D0%BD%D1%8B%D0%B5_%D0%98%D0%B7%D0%B4%D0%B5%D0%BB%D0%B8%D1%8F_%D0%94%D0%BB%D1%8F_%D0%9A%D0%B0%D0%B6%D0%B4%D0%BE%D0%B3%D0%BE

    Reply

  45. This design is steller! You most certainly know how to keep a reader entertained. Between your wit and your videos, I was almost moved to start my own blog (well, almost…HaHa!) Excellent job. I really loved what you had to say, and more than that, how you presented it. Too cool!

    Reply

  49. В экстренной ситуации на фоне алкоголя — обращайтесь к скорой помощи Narcology Clinic в Москве. Качественный выезд нарколога, медицинская поддержка, нейтрализация последствий и помощь в восстановлении.
    Выяснить больше – скорая наркологическая помощь

    Reply